Applying Alternative Colors for Printing Using the Printer Driver

You can apply the registered alternative colors for printing.

1. Open the original data with the application, and then click [Print] on the [File] menu.

   Example: Sample B (B_sample.pdf) is used.

2. Select the printer to use for printing and click [Properties].

   

3. Click the [Management] tab, and then click [Manual Settings].

   • If the [Management] tab is not displayed, click   to switch the tab display.

   

4. In [Optional Settings] - [Alternative Color Table], select [Image Controller Default]. Click [OK].

   

5. On the [Print] screen, enter the [Copies] and click [Print]. After printing, check the results.

   Check that the specified original CMYK color has been replaced by the corresponding alternative color.

   Example: The color changes from navy to red.

   

   • It is recommended that frequently used color output settings be registered in the color configuration. (Refer to Image Quality: Registering the Color Configuration.)