Registering Spot Color Information with Color Centro

Start Color Centro and log in to the machine. (Refer to Start Color Centro.)

The Color Centro top screen is displayed.

Click [Spot Color] on the top screen.

The [Spot Color] screen is displayed.

Select [New Table] from the [File] menu, and then click [New].

The new creation screen is displayed.

Enter the name of the spot color you want to create, and click [OK].

Example: The spot color is named "Sample Color."

The added spot color name is displayed on the [Spot Color] screen.

Set the spot color's CMYK value and click [Save].

The colors being adjusted are displayed in the [After Adjustment] column.

Example: The spot color's CMYK value is set to "C100%."

The Spot Color Table [Save] screen is displayed.

Enter the name of the spot color table in which you want to save the spot color.

Example: The name of the spot color table is "Sample Table."

• The default spot color table has an asterisk (*) at the end of its name.

• If you edit and save the default spot color table, it is saved with a name without the asterisk.

• You can save multiple spot color tables with the same name.

• When printing, the spot color tables are searched from the top of the table on the [Spot Color] screen. If the same spot color is saved in more than one spot color table, the first spot color found is applied.

Select [Controller] as the [Destination Folder] and click [Save].

Selecting [Controller] saves the spot color to the image controller.

After checking that the spot color is saved, close the screen by selecting [Close] from the [File] menu.