Basic Settings: Registering Direct Print Initial Settings

[PDL]

Specifies the default page description language such as [PCL] and [PS].

[Paper Tray Setting]

Specifies the default paper tray setting. Setting options vary with the optional configuration.

[Output Tray Setting]

Specifies the default output tray setting. Setting options vary with the optional configuration.

[Simplex/Duplex]

Specifies the default Simplex (1-Sided)/Duplex (2-Sided) print setting.

[Binding Position]

Specifies the default [Binding Position].

[Staple]

Specifies whether to use stapling functions such as [Left Corner] and [2 Positions].

[Punch]

Specifies whether to use punching functions such as [2-Hole].

[Fold/Trimming]

Specifies whether to use fold/trimming functions such as [Z-Fold] and [Fold & Staple / Trim]. Setting options vary with the optional configuration.

[Offset]

Specifies whether to offset the output sheets.

[Face]

Specifies whether to output data using Face Up or Face Down.

[Order]

Specifies whether to output sheets in the forward or reverse direction.

[Sets]

Specifies the default [Sets] setting.

[Sort/Group]

Specifies whether to print all pages of the first copy followed by all pages of the next (Sort) or to print all copies of page 1, then all copies of page 2 and so on (Group) when printing multiple sets.

[Paper Size]

Specifies the default [Paper Size] setting.

[Orientation]

Specifies the default [Orientation] setting.

[Banner Option]

Specifies whether to print the banner page (cover page) showing the sender or title of the print job.

[Banner Tray]

Specifies the paper tray used to print banner pages.

[Convert Paper Size]

Specifies the converting paper size when the paper size that is specified by the Direct Print Setting is not set in the tray.

[Combine Originals/Image Repeat]

Specifies whether to use functions such as [2-in-1] and [2 Repeat].

[Booklet Pagination]

Specifies whether to print in the booklet mode.

[Adhesive binding]

Specifies whether to print using the adhesive binding method.

[Image Pos.]

Specifies the default of [Image Pos.].

[Pile Permission]

Specifies whether to permit piling up on the large capacity stacker.

When selected On, other jobs can be printed and are permitted to be piled up on the large capacity stacker.

When turned Off, the next job cannot be printed until the current job is removed from the large capacity stacker.

[Quality]

Specifies the default of [Quality].

[Feed Direction]

Select the paper feeding direction from landscape ([LEF]), portrait ([SEF]), or automatic detection ([Auto]).

[Full Bleed]

Specifies whether to perform full bleed printing.

Print in the original image without blank borders.

[180° Rotate]

Specifies whether to print data by rotating it by 180 deg.

[Switch over 9 11 / 8 1/2 11 Tab]

For direct printing of 8.5 11 index with PDF, TIFF, or PPML, this option specifies whether to output it in 9 11 or 8.5 11 index.

[Wait]

Stores a print job as a reserved job. To output such a print job, press Start on the control panel of this machine.

[External Finisher]

Select whether to use the External Finisher.

[Auto Image Adjustment]

Performs automatic image adjustment depending on the setting you selected when printing.