Adjust the registration speed of Large Capacity Unit LU-202XL. This option is available when image lines occur or thick paper is used.
This button is displayed only when Large Capacity Unit LU-202XL is mounted on this machine.
Objects of Adjustment: Tray 3 (Large Capacity Unit LU-202XL)
Adjustment Range: -15 (Lower the registration speed) to +5 (Heighten the registration speed) (1 step = 0.1%)
Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.
Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment], [Printer Adjustment], and [LCT Banner Regist. Speed Adj.] in sequence.
The [LCT Banner Paper Regist. Speed Adj.] screen is displayed.
Press [Print Mode].
The [PRINT MODE] screen is displayed.
Select A3 paper, then press Start on the control panel.
A sample pattern will be output.
Press [Exit PrintMode] to return to the [LCT Banner Paper Regist. Speed Adj.] screen.
Check the sample pattern.
If any adjustment is required, enter the desired adjustment value using the touch panel keypad.
Use [+/-] to specify the value to be positive or negative.
Press [Set] to change the current value.
Repeat steps 3 to 7 until the desired result is obtained.
Press [Return] to return to the [Printer Adjustment Menu] screen.