Adjust the staple pitch determined in Fold & Staple and Staple modes.
Objects of Adjustment: Fold & Staple, Staple
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [Finisher Adjustment] and [2 Pos. Staple Pitch Adj.] in sequence.
Select either [Fold & Staple] or [Staple].
Press [Print Mode].
Load the paper with the size to be adjusted, then select that tray.
Press Start on the control panel.
A sample pattern will be output.
Check the length (a) of staple pitch.
Allowance: a = 128 mm ± 6 mm
If any adjustment is required, press [Exit PrintMode] to return to the [2 Position Staple Pitch] screen.
Use the touch panel keypad to enter the set value.
Press [Set] to change the current value.
Adjustment Range: +128 (Narrow) to +160 (Wide) (1 step = 1 mm)
Repeat steps 4 to 9 until the desired result is obtained.
Press [Return].
The screen returns to the [Finisher Adjustment Menu] screen.