Adjust the staple strength of Saddle Stitcher SD-513 to change the staple leg shape.
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [Finisher Adjustment], [Saddle Stitcher Adjustment], and [Staple Tip Adjustment] in sequence.
Press [Print Mode].
Load A3 paper or 11 17 paper into any tray, then select its tray button.
Press Start on the control panel.
A sample pattern will be output.
Displays the staple leg shape.
Press [Exit PrintMode] to return to the [Staple Tip Adjustment] screen.
If any adjustment is required, use the touch panel keypad to enter the set value.
Adjustment Range: -9 ([To be round]) to +9 ([To be flat]) (1 step = 1 msec.)
Use [+/-] to specify the value to be positive or negative.
Press [Set] to change the Current Value.
Repeat steps 3 to 9 until the desired result is obtained.
Press [Return].
The screen returns to the [Saddle Stitcher Adjustment Menu] screen.