Adjust the staple position in Saddle Stitcher SD-513. Reduce the misalignment between the stapling positions and folding line.
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [Finisher Adjustment], [Saddle Stitcher Adjustment], and [Staple Offset Adjustment] in sequence.
Press [Print Mode].
Load A3 paper or 11 17 paper into any tray, then select its tray button.
Press Start on the control panel.
A sample pattern will be output.
Measure misalignment a between the folding line and staple positions.
Allowance: a = ± 1 mm
Press [Exit PrintMode] to return to the [Staple Offset Adjustment] screen.
If any adjustment is required, use the touch panel keypad to enter the set value.
Adjustment Range: -10 ([To move leftward]) to +10 ([To move rightward]) (1 step = 0.1 mm)
Use [+/-] to specify the value to be positive or negative.
Press [Set] to change the Current Value.
Repeat steps 3 to 9 until the desired result is obtained.
Press [Return].
The screen returns to the [Saddle Stitcher Adjustment Menu] screen.