To reduce the time required to start the conveyance of the original, adjust the standby position of the Original feed tray on the ADF.
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [ADF Adjustment] and [Original Tray Pre-rise Set.] in sequence.
Select whether to make the standby position of the Original feed tray higher than usual.
Select [ON] or [OFF] in [Original Tray Pre-rise].
If [ON] is selected in [Original Tray Pre-rise], enter the set value of the [Paper Tray] using the touch panel keypad or [][].
Adjustment Range: 1 to 7 (As the numeric value increases, the standby position lowers.)
[]: Lifts the standby position of the Original feed tray
[]: Lowers the standby position of the Original feed tray.
Press [OK].
The screen returns to the [ADF Adjustment Menu] screen.