Home ApplicationCommunication Check

Communication Check

Checks the IPsec communication.

  1. Access IPsec to display the IPsec Operation Selection screen.

  2. Select the [Communication Check] radio button, and click [OK].

    The [Communication Check] screen is displayed.

  3. Enter the IP address of the peer in the [IP Address] field, and click [Check Connection].

    • The connection check is performed. This may take up to 5 minutes.

  4. Click [OK] on the setting complete screen.

    The check result is displayed. If a communication error has occurred, message [Connection failed.] is displayed. If a communication error log exists, [IP Address], [Error], and [Occurred Time] are displayed.

  5. To check the communication error log, click an IP address.

  6. Click on [Back].

    The screen returns to the [Check Communication] screen.