Collectively adjust items related to image stability. The type of adjustment to be performed can be set freely.
Press [Package Color Auto Adj.].
For details about the procedure, refer to [Package Color Auto Adj.].
Before performing the adjustment, press [Initial Set.] as necessary to enable the adjustment settings to be changed.
Change any of the setting contents ([Screen of Adjustment Target], [Additional Adjustment], [Maximum Density Adjustment Tray], [Adjustment Tray]).
If you have set [Auto Run] to ON, [Package Color Auto Adj.] is performed automatically when the machine is powered ON.
Load the paper used when registering the target density into the tray, and select that tray.
You can also change the [Paper Setting] and [Output Setting].
Check the contents of the adjustment results displayed after the adjustment has been completed.