Adjust the magnification in the main scanning direction (crosswise direction) of the back side when using the ADF.
Scanning accuracy is maintained by making regular adjustments.
Adjustment / Maintenance
Touch Panel, Control Panel
Paper Feeder Unit PF-713
Displays the current magnification in the main scanning direction when scanning the original on the ADF.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [ADF Adjustment] - [Main Scan Dir. Zoom(Back)]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [ADF Adjustment] - [Main Scan Dir. Zoom(Back)]
The test chart is scanned and a sample is printed out.
Load the test chart with the back side facing upward.
Standard value: 0 mm ^ 1.4 mm
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-10~+10 1step = 0.1%]