Adjust the alignment amount in the crosswise direction of Trimmer Unit TU-510.
Adjustment / Maintenance
Trimmer Unit TU-510 with Banner Unit MK-764 mounted
Alignment position selection key
Select the alignment position to adjust.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Trimmer Unit Adjustment] - [CD Alignment Adjustment]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Trimmer Unit Adjustment] - [CD Alignment Adjustment]
A sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
(-) To decrease the push-in amount of the alignment plate, (+) To increase the push-in amount of the alignment plate
[Adj. Range:-30~+30 1step = 0.1mm]