Adjust a skew in the paper feed direction.
Adjustment / Maintenance
Trimmer Unit TU-510
Adjusts a skew of coated paper.
Adjusts a skew of uncoated paper.
[Offset for All]
Adjusts a skew common to all the paper weights.
Paper weight selection key
Selects the paper weight to adjust.
[+] / [,]
Switches the paper size page.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Trimmer Unit Adjustment] - [Paper Skew Adjustment]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Trimmer Unit Adjustment] - [Paper Skew Adjustment]
These items are not selectable when [Offset for All] is selected in step 1.
A sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-125~+125 1step = 0.02%]
The adjustment value can be calculated as follows: Amount of paper distortion (a) ÷ Length in main scanning direction (crosswise direction) at paper edge (b).