Adjust the spine shape.
This function allows you to set whether or not to make the spine a square or round shape by adjusting the strength used to form the spine when performing perfect binding using Perfect Binder PB-503.
Adjustment / Maintenance
Perfect Binder PB-503
[Up/Down Forward Adj.]
Sets the spine shape when using [Perfect Binder Tray].
[Up/Down Rear Adj.]
Sets the spine shape when [Except PB Tray] is used.
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Spine Corner Forming Pos.]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Spine Corner Forming Pos.]
When using any paper tray, you need to set a cover tray by selecting [Perfect Bind] of [Output Setting]. For details, refer to [Cover Tray].
A perfect binding sample is output.
(1) Left cover (2) Spine (3) Right cover (4) Scanning direction
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
(-) To convex (+) To concave
[Adj. Range:-128~+127 1step = 0.1mm]