Adjust the alignment width of the top side of the cover.
Make this adjustment when there is a problem with the cover position when performing perfect binding using Perfect Binder PB-503.
Adjustment / Maintenance
Perfect Binder PB-503
[Perfect Binder Tray]
Sets the alignment width when using [Perfect Binder Tray].
[Except PB Tray]
Sets the alignment width when [Except PB Tray] is used.
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Cover Up/Down CD Width Adj.]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Cover Up/Down CD Width Adj.]
When using any paper tray, you need to set a cover tray by selecting [Perfect Bind] of [Output Setting]. For details, refer to [Cover Tray].
A perfect binding sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
(-) To reduce the distortion (+) To reduce the misalignment
[Adj. Range:-20~+20 1step = 0.1mm]