Adjust the position of the lead edge of the left cover sheet for the body.
Make this adjustment when there is a problem with the cover position when performing perfect binding using Perfect Binder PB-503.
Adjustment / Maintenance
Perfect Binder PB-503
[Offset for All Size]
Adjusts the cover lead edge position common to all the paper sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Sets the numeric value entered using the keypad to the selected setting item.
The paper size used in this section refers to the body size for the cover.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Cover Lead Edge Adj.]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Cover Lead Edge Adj.]
When using any paper tray, you need to set a cover tray by selecting [Perfect Bind] of [Output Setting]. For details, refer to [Cover Tray].
A perfect binding sample is output.
(1) Body (2) Right cover (3) Protrusion length (4) Left cover lead edge (5) Body
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
(-) To move closer to the body, (+) To move further from the body
[Adj. Range:-128~+127 1step = 0.1mm]