Adjust the position to start gluing on the body.
Make this adjustment when there is a problem with the glue amount when performing perfect binding using Perfect Binder PB-503.
Adjustment / Maintenance
Perfect Binder PB-503
[Offset for All Size]
Adjusts the gluing start position common to all the paper sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Sets the numeric value entered using the keypad to the selected setting item.
The sizes referred to in this section are those of bodies corresponding to cover sizes.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Glue Start Position]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Perfect Binder Adjustment] - [Glue Start Position]
When using any paper tray, you need to set a cover tray by selecting [Perfect Bind] of [Output Setting]. For details, refer to [Cover Tray].
A perfect binding sample is output.
(1) Body (2) Gluing start position in Ahead mode (3) Gluing start position in Back mode
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
(-) To increase, (+) To decrease
[Adj. Range:-128~+127 1step = 0.1mm]