Adjust the slitting widths of the top and bottom sides on the saddle stitcher.
Make this adjustment when there is a problem with the printout finishing.
Adjustment / Maintenance
Saddle Stitcher SD-513 with Trimmer Unit TU-503 mounted
Adjusts the slitting width of the front side.
Adjusts the slitting width of the rear side.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [2-Side Slitting Adjustment]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [2-Side Slitting Adjustment]
A sample is output.
Standard value: Setting value -a = within -0.5 mm to +0.5 mm
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-10~+10 1step = 0.1mm]