Adjust the parallelism between the trimming line and fore edge on the saddle stitcher.
Make this adjustment when there is a problem with the form of the printout.
Adjustment / Maintenance
Saddle Stitcher SD-513 with Folding Unit FD-504 mounted
Adjusts the parallelism of the front trimming line.
Adjusts the parallelism of the rear trimming line.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Parallel Trimming Adjustment]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Parallel Trimming Adjustment]
A sample is output.
Standard value: a = 4.0 mm or less (Fold & Staple quantity: 50 sheets)
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:0~+30 1step = 0.1mm]