Adjust the staple pitch when stapling with 2 staples on the saddle stitcher.
Make this adjustment when misalignment or distortion occurs on the paper stack during stapling.
Adjustment / Maintenance
Saddle Stitcher SD-513
[Offset for All Size]
Adjusts the staple pitch common to all sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Staple Pitch Adjustment] - [2 Position Staple]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Staple Pitch Adjustment] - [2 Position Staple]
A sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-20~+20 1step = 0.1mm]