Adjust the half-fold crease position of Creaser Unit CR-101 mounted on Saddle Stitcher SD-513.
Make this adjustment when the distance from the cover edge to the crease position on the top face of output paper deviates from the standard value.
Adjustment / Maintenance
Saddle Stitcher SD-513 with Creaser Unit CR-101 mounted
[Offset for All Size]
Adjusts the crease position common to all the paper sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Crease Position Adjustment] - [Half-Fold Crease Position]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Crease Position Adjustment] - [Half-Fold Crease Position]
A sample is output.
Standard value: a = -1.0 mm to +1.0 mm or less
(1) Folding line (2) Crease part
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-20~+20 1step = 0.1mm]