Adjust the push-in amount of the adjustment plates for the saddle stitcher.
Make this adjustment when the folding line is skewed in [Single Fold] or [Multi Fold].
Adjustment / Maintenance
Saddle Stitcher SD-513
Adjusts the push-in amount of the adjustment plates for single folding.
Sets the push-in amount of the adjustment plates for multi-folding.
[Offset for All Size]
Adjusts the push-in amount common to all the paper sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Fold Skew Adjustment]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Saddle Stitcher Adjustment] - [Fold Skew Adjustment]
A sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-50~+50 1step = 0.1mm]