Adjust the alignment plate position in front of the crosswise direction of the Stacker tray to eliminate misalignment or distortion of the output paper.
This function is available when a significant misalignment occurs in the crosswise direction during output processing.
Adjustment / Maintenance
Large Capacity Stacker LS-507
Sets the alignment plate position of the 1st Large Capacity Stacker LS-507. This item is displayed when Large Capacity Stacker LS-507 is mounted as a pair.
Sets the alignment plate position of the 2nd Large Capacity Stacker LS-507. This item is displayed when Large Capacity Stacker LS-507 is mounted as a pair.
Paper size selection key
Selects the paper size to adjust.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Stacker Adjustment] - [Standby Pos.(Front Adj.)]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Stacker Adjustment] - [Standby Pos.(Front Adj.)]
A sample is output, and printing is interrupted. A warning message is displayed on the screen.
When the check is completed, remove paper.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
(-) To narrow the standby position, (+) To widen the standby position
[Adj. Range:-20~+20 1step = 0.1mm]