Adjust the interval between 2 punch holes and the paper edge. Perform this function when the punch holes are very misaligned.
Adjustment / Maintenance
[Offset for All Size]
Adjusts the punch position common to all the paper sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Multi Folder Adjustment] - [Multi Folder(Punch) Adj.] - [Punch Vertical Position Adj.] - [2-Hole Punch]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Multi Folder Adjustment] - [Multi Folder(Punch) Adj.] - [Punch Vertical Position Adj.] - [2-Hole Punch]
A sample is output.
Standard value: 10.5 mm -4.0 mm to +4.0 mm
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-40~+40 1step = 0.1mm]
Adjust the setting value by referencing the figure.