Adjust the push-in amount of the double fold plate when performing Tri-Fold.
Make this adjustment when a significant misalignment occurs on a tri-fold paper stack.
Adjustment / Maintenance
Finisher FS-541 with Saddle Stitcher SD-510 mounted
Paper size selection key
Selects the paper size to adjust.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Fold) Adj.] - [Tri-Fold Adjustment] - [Double Fold Plate Adjustment]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Fold) Adj.] - [Tri-Fold Adjustment] - [Double Fold Plate Adjustment]
[Separate Scan] is automatically set to [Multi 3-Fold].
A sample is output.
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-50~+50 1step = 0.1mm]
If a significant bundle misalignment occurs or the double-fold position is misaligned on the cover and the 2nd and subsequent sheets when multi-folding is performed for a solid image, make the push-in amount deeper.
If a box-shaped fold is found on thin paper, make the push-in amount shallower.