Adjust the descent of the rewind paddle of the stacker.
Make this adjustment when you want to reduce a misalignment or deflection of the paper.
Adjustment / Maintenance
[Offset for All Size]
Adjusts the descent common to all the paper sizes.
Paper size selection key
Selects the paper size to adjust.
[+] / [,]
Switches the paper size page.
Used to enter numeric values.
Returns the entered numeric value to "0".
Sets the numeric value entered using the keypad to the selected setting item.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Main) Adj.] - [Rewind Paddle Descent Adj.]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Main) Adj.] - [Rewind Paddle Descent Adj.]
[Output Setting] is automatically set to [Staple].
A sample is output.
Standard value: a = -1 mm to +1 mm
Use [+ / -] to select the plus or minus of the numeric value. To change [Current Data], press [Set].
[Adj. Range:-10~+10 1step = 0.2mm]