Adjust the operation of the alignment plate used to arrange sheets delivered to the Main tray.
This function reduces operation noise, or adjusts the length of time required to change the finisher mode.
Adjustment / Maintenance
Output Tray OT-512 or Finisher FS-541
Automatically activates the output alignment plate to suit the paper type.
Deactivates the output alignment plate for all the paper types.
The volume of operation noise is reduced by stopping alignment plate operation sounds. The length of time required to switch the finisher mode (for example, from staple mode to punch mode) is also reduced.
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Main) Adj.] - [Output Alignment Operation]
Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Finisher Adjustment] - [Staple Finisher Adjustment] - [Staple Finisher(Main) Adj.] - [Output Alignment Operation]