Adjust the tone curve of a hold job (RIPed) or secure job.
You can also adjust the tone curve for each page (Page Tone Curve).
The tone curve cannot be adjusted when
AccurioPro Print Manager
Select the job tone curve or page tone curve to adjust.
Select the controller tone curve to use for a job tone curve from the menu list.
Adjusts the tone curve to apply to an image object.
Adjusts the tone curve to apply to a text object or graphic object.
Applies the same tone curve to [Image] and [Text/Graphics].
By default, only this setting is available.
[Convert to Job Tone Curve]
Converts the tone curve selected in [Tone Curve] to a job tone curve.
[None] and [Job Tone Curve] are not selectable.
Creates a tone curve for each page (Page Tone Curve). For details, refer to [Create...].
Deletes the selected page tone curve.
Clicking this button displays a dialog box. Then, click [Yes, I want to remove all the Tone Curve entries for this page.]; you can delete the target.
Image display area
Displays the images before and after tone curve adjustment.
Displays the image before tone curve adjustment.
Displays the image after tone curve adjustment.
Zooms out an image.
Zooms in an image.
Select the image display magnification from the menu list.
Rotates the image leftward by 90 degrees.
Rotates the image rightward by 90 degrees.
Creates a page tone curve for the displayed page.
Page display area
Displays the job page layout using thumbnail images.
You can click a thumbnail image and select the page you want to adjust the tone curve.
Switches the pages to adjust the tone curve. You can also drag the slider horizontally to select a page.
Tone curve adjustment area
Operates the tone curve to adjust the input-output density curve for each of the CMYK colors. For details, refer to Tone Curve Adjustment Area.
[Controller Tone Curves...]
Calls the tone curve stored in the image controller to AccurioPro Print Manager, and adjusts the tone curve. For details, refer to [Controller Tone Curves...].
Prints the job to which the adjusted contents are applied. You can check the tone curve adjustment result. For details, refer to [Confirmation Print...].
Applies the setting, and stores the adjusted tone curve.
Moves to the previous screen without saving the settings.
If you want to select [Image] or [Text/Graphics] with [Object Type], change No.184 to [On] with [Software Switch Setting]. For details, refer to [Software Switch Setting].
AccurioPro Print Manager - Select a job. - [Job Management] - [Tone Curve Adjustment...]
AccurioPro Print Manager - Select a job, and right-click. - [Tone Curve Adjustment...]
Touch panel - [CNTL] - Select a job. - [Job Management] - [Tone Curve Adjustment...]
Touch panel - [CNTL] - Select a job, and right-click. - [Tone Curve Adjustment...]