Configure the setting to print and scan data via the Web service using the discovery proxy server.
In general use, to print data from this system using the Web service, the computer must be connected to the location in which a multicast communication can be established from this system. In this case, to enable printing from this system, install the discovery proxy server in the location in which a unicast communication can be established from this system.
Network / Security
Uses a proxy server.
Does not use a proxy server.
[Proxy1] to [Proxy3]
Select each check box to set a proxy server in the following setting items.
The setting method is the same for each proxy server.
[Proxy Server Address]
Set the proxy server address.
To enter the host name, select the [Please check to enter host name.] check box.
Set the file path of the proxy server.
Up to 255 single-byte characters can be entered.
Does not use SSL.
[Proxy Server Port Number]
Enter the port number of the proxy server.
Range: 1 to 65535
Default: 443 (when SSL is enabled), 80 (when SSL is disabled)
Applies the setting.
Cancels the setting.
Web Connection - [Network] - [DPWS Settings] - [DPWS Extension Settings]