Home ConfigurationAuto Ring Binder GP-502

Auto Ring Binder GP-502

No.

Name

Description

1

Ring binder top cover

Opens upward for removal of mishandled paper.

2

Display panel

Displays the status of the ring binder, position of paper jam, alarm for supplies and disposals, and counts/versions.

3

Lock release handle

Pulled to unlock and open the upper unit of the ring binder.

4

Booklet tray

Holds ring-bound booklets. Withdraw the tray to take out the output booklets.

5

Ring binder front door

Opens to allow removal of mishandled paper or waste paper punched out.

6

Ring binder front door handle

Held to open the ring binder front door.

7

Power switch

Turns on/off the power of the ring binder.

8

Power plug

Supplies power to the ring binder.

  • Keep the power switch turned on for the ring binder. Turning it off will not only deactivate this machine but disable the bypass function to convey paper to the downstream finisher.

No.

Name

Description

1

Paper inlet

Ejects paper fed to the ring binder.

2

Paper distributing section

Delivers paper fed to the ring binder into the binding section, or bypasses it to the downstream finisher.

3

Handle[GP1]

Held to open the bypass deck upward.

4

Bypass deck

Bypasses paper fed to the ring binder straight to the downstream finisher.

5

Vertical paper path

Feeds paper to the punching device.

6

Bind part drawer

Holds bind parts.

7

Knob [GP3]

Turned counterclockwise for removal of mishandled paper.

8

Lever [GP2]

Opens leftward for removal of mishandled paper.

9

Punch scrap box

Withdrawn for removal of waste paper punched out.

10

Knob [GP4]

Turned clockwise to feed mishandled paper.

11

Paper stacker

Aligns sheets to be bound, and delivers bound booklets to the booklet tray.

12

Binding section

Binds a set of paper with a bind part. Take a look when trouble occurs on bind parts.