Home Settings and AdjustmentsTri-Fold Adjustment: Adjusting the Folded Positions in Tri-Fold Mode

Tri-Fold Adjustment: Adjusting the Folded Positions in Tri-Fold Mode

When using Finisher FS-612, adjust the Fold 1 position in Tri-Fold mode.

Objects of Adjustment: Offset for All Size, A4 , 8.5 11 , 16K

  1. Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.

  2. Press [Finisher Adjustment] and [Tri-Fold Adjustment] in sequence.

  3. Select the size to be adjusted.

  4. Press [Print Mode].

  5. Load the paper with the size to be adjusted, then select that tray.

  6. Press Start on the control panel.

    A sample pattern will be output.

  7. Check the folding positions on the printed paper.

    Allowance:

    Document size

    a

    b

    c

    A4

    95 mm ± 2 mm

    101 mm ± 2 mm

    101 mm ± 2 mm

    8.5 11

    89 mm ± 2 mm

    95 mm ± 2 mm

    95 mm ± 2 mm

    16K

    88 mm ± 2 mm

    91 mm ± 2 mm

    91 mm ± 2 mm

     

  8. If any adjustment is required, press [Exit PrintMode] to return to the [Tri-Fold Adjustment] screen.

  9. Use the touch panel keypad to enter the set value.

    • Use [+/-] to specify the value to be positive or negative.

    • Press [Set] to change the current value.

    • Adjustment Range: -128 ([To widen]) to +127 ([To narrow]) (1 step = 0.1 mm)

  10. Repeat steps 4 to 9 until the desired result is obtained.

  11. Press [Return].

    The screen returns to the [Finisher Adjustment Menu] screen.