Home CopyImage Centering: Copying Image onto the Center of Paper

Image Centering: Copying Image onto the Center of Paper

Use this function to detect the image area of the original and center the whole image on copy paper.

Original positioning

Output

  1. Position the original.

    Both ADF and original glass are available.

  2. Press [Application] on the [COPY] screen.

  3. Press [Image Centering] on the [Application] screen.

    [No Image Area Erase] is set automatically. The incompatible function keys are dimmed to show inactivity.

  4. Press [OK] on the [Application] screen to return to the [COPY] screen.

    The [Image Centering] and [No Image Area Erase] icons are displayed under [Application] on the [COPY] screen.

    The [Auto Paper] and [Auto Zoom] buttons are dimmed and [x1.0] magnification is set.

    Available copy modes are [1->1] and [1->2]. Selecting [1->2] sets [Separate Scan] automatically.

  5. Enter the desired print quantity from the keypad on theĀ control panel.

  6. Press Start on the control panel.

    • Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen.

    • Image Centering may perform incorrectly if the lighting in the work place is directly over the original glass. In this case, consult your service representative about an appropriate place for installation.