Home ScanSCAN Screen

[SCAN] Screen

To display this screen, press [SCAN]. Set an address to send scan data.

[A to Z]

Displays an address in which the initial character of the reference name is an alphabet.

[Others]

Displays an address in which the initial character of the reference name is a symbol.
It also displays addresses whose reference names are not registered.

[Main]

Displays only addresses which were registered as Main address.
A machine administrator registers the Main address.
For details, contact your machine administrator.

[All]

Displays all addresses.

[][]

Switches between pages which display addresses.
Hold down the button to switch pages continuously.

[Option Setting]

Displays the [E-mail Option Setting] screen.
For details, refer to Settings Required to Use Scan to E-mail.

[Input Address]

Displays the [Input Address] screen.
For details, refer to Settings Required to Use Scan to E-mail, Settings Required to Use Scan to HDD, Settings Required to Use Scan to FTP, or Settings Required to Use Scan to SMB.

[Search]

Displays the [Search] screen.
For details, refer to Using the Search.

[Clear All]

Clears all the addresses selected.

[Register/Edit]

Displays [Add], [Change], and [Delete].

[Scan Settings]

Displays the Scan Settings screen.
For details, refer to Scan Settings Screen.

The [SCAN] screen (Group) dose not provide [Option Setting], [Input Address], [Search], [A to Z], [Others], [Main], and [All].