Home ApplicationDirect Print Setting

Direct Print Setting

Click [Direct Print Setting] on the menu of [Print Setting] tab to display this screen.

The following settings are supposed to be a set, and up to six sets can be specified. Select one from these six sets for each RAW port in [Select Printer Setting]. If you use a port other than that set in [Select Printer Setting] without any instruction from the driver during printing, the setting specified as the default by a radio button in the [Default Setting] is reflected on the printing.

Item

Description

[Basic Setting]

Make the basic settings for printing.

[PCL Setting]

Make the settings on PCL printing.

[PS Setting]

Make the settings on PostScript printing.

[TIFF Setting]

Make the settings on TIFF printing.

[APPE Setting]

Specifies the settings of the APPE printing. When APPE cannot be used, this item is dimmed.

Basic Setting

  1. Click [Edit] in the [Basic Setting] column.

  2. Select a desired option from the drop-down list provided for each setting item. Click each field that requires entry, and enter a value.

  3. Click [OK]. Clicking [Cancel] cancels the setting.

  4. Click [OK] on the setting complete screen.

PCL Setting

  1. Click [Edit] in the [PCL Setting] column.

  2. Select a font symbol set from the drop down list of [Symbol Set].

  3. Select either embedded fonts ([Resident Font]) or downloaded fonts ([Download Font]) for [Typeface]. When selecting [Resident Font], select the desired font from the drop down list. When selecting [Download Font], specify the number of the desired downloaded font.

  4. Enter the size of scalable font (4.00 pt to 999.75 pt) in the [Scalable Font] text box.

  5. Enter the size of bitmap font (0.44 pitch to 99.99 pitch) in the [Bitmap Font] text box.

  6. Enter the lines per page (5 to 128) in the [Line/Page] text box.

  7. Using the [CR/LF Mapping] drop down list, specify how to manage the replacement of CR (carriage return) and LF (line feed) in text data.

  8. Click [OK]. Clicking [Cancel] cancels the setting.

  9. Click [OK] on the setting complete screen.

PS Setting

  1. Click [Edit] in the [PS Setting] column.

  2. Select either [ON] or [OFF] in the [PS Error Print] drop-down list, and select either [ON] or [OFF] in the [Grayscale OverPrint] drop-down list.

  3. Click [OK]. Clicking [Cancel] cancels the setting.

  4. Click [OK] on the setting complete screen.

TIFF Setting

  1. Click [Edit] in the [TIFF Setting] column.

  2. Select either [ON] or [OFF] in the [Auto Paper Select] drop-down list, and select either [Left] or [Center] in the [Image Position] drop-down list.

  3. Click [OK]. Clicking [Cancel] cancels the setting.

  4. Click [OK] on the setting complete screen.

APPE Setting

  1. Click [Edit] in the [APPE setting].

  2. Select either [ON] or [OFF] in the [Print PDF Errors] drop-down list, and select either [ON] or [OFF] in the [APPE] drop-down list.

  3. Click [OK]. Clicking [Cancel] cancels the setting.

  4. Click [OK] on the setting complete screen.