Applying the Saved Tone Curve When Printing

Open the original data with the application, and then click [Print] on the [File] menu.

Example: Sample B (B_sample.pdf) is used.

Select the printer to use for printing and click [Properties].

Select [Default Settings] for [Favorite Setting] and click [Load].

Before setting the tone curve, restore the default setting.

Click the [Imaging] tab, and then click [Acquire Image Controller Default].

When the default settings of the image controller are acquired, a green checkmark is displayed.

• If the default settings of the image controller cannot be acquired, a red mark is displayed. Check if an optional paper tray is correctly mounted.

Under [Tone Curve], select the tone curve you want to apply and click [OK].

You can set different tone curves for [Image] and [Text/Graphics].

Example: "Sample-Curve" is selected.

• A warning symbol  is displayed when you set a tone curve. This is because it is different from the controller's current default setting. Proceed by clicking [OK].

• To hold the text/graphic density to 100%, select the check box.

On the [Print] screen, enter the [Copies] and click [Print].

The original is printed using the applied tone curve.