Home Settings and AdjustmentsQuick IP Filtering: Restricting Access to the Machine

Quick IP Filtering: Restricting Access to the Machine

Restrict access to the machine by means of IP address (IPv4/IPv6) or subnet mask.

[No Filtering]: Connect communications from all IP addresses.

[Sync. IP Address]: Limit IP addresses allowed to connect to the machine by setting an access range of IPv4 or IPv6 according to the IP address of the machine.

[Sync. Subnet Mask]: Limit IP addresses allowed to connect to the machine by using the machine's IP address, subnet mask, or prefix.

  1. Follow the procedure on Quick Security Setting to display the [Quick Security Setting Menu] screen.

  2. Press [Quick IP Filtering] on the [Quick Security Setting Menu] screen.

  3. Select the desired filtering method.

    • Select either [No Filtering], [Sync. IP Address], or [Sync. Subnet Mask].

  4. Press [OK] to complete the setting.

    • If you select [Sync. IP Address] or [Sync. Subnet Mask] and press [OK], the IPv4 and IPv6 access ranges will be fixed.

    • To cancel the change, press [Cancel]. In either case, the screen returns to the [Quick Security Setting Menu] screen.