Cancelling Tandem Mode Printing on the Partner MFP Only
Follow the procedure below to cancel printing on the Partner MFP and continue on This MFP.
Press Stop on the control panel of the Partner MFP.
The Partner MFP stops printing immediately, and a confirmation dialog appears on the screen of the Partner MFP. At this time, the tandem mode is not yet released.
If temporary suspension in the Partner MFP takes a long time, the Distribution Recovery mode will be activated to enable This MFP to take over the remaining print quantity.
Press [Cancel Job].
This will release the tandem mode and cancel printing on the Partner MFP.
Press [Continue] to continue the tandem mode printing stopped temporarily on the Partner MFP.
