Home CopyUsing Finisher FS-532

Using Finisher FS-532

Finisher FS-532 has a primary (main) tray and a secondary (sub) tray, each of which provides the following output modes.

Output to the primary (main) tray

Output mode

Description

[Offset Sort]

Outputs each sorted set offset by approx. 15±3 mm upon exit. Copies can also be offset by specified number of sorted sets, from 1 to 9,999.

[Sort]

Outputs multiple copies of the original set. Copies are stacked upon exit without being offset.

[Offset Group]

Groups together multiple copies of each original and offsets the sets upon exit. Copies can also be offset by specified number of grouped sets, from 1 to 9,999.

[Group]

Groups together multiple copies of each original. Copies are stacked upon exit without being offset.

[Staple] (+ [Sort])

Outputs each sorted set, stapling it automatically upon exit. Selecting [Staple] automatically selects [Sort] at the same time.

[Staple] (+ [Offset Sort])

Outputs (offset) each sorted set, stapling it automatically upon exit.

[Staple] (+ [Group])

Groups together multiple copies of each original, stapling each set upon exit.

[Staple] (+ [Offset Group])

Groups together multiple copies of each original, stapling and offsetting each set upon exit.

Combined with the output modes above except staple mode, you can also select the desired Face ([Face Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed.

Original

Output

Example

Make 3 printed sets from 4 original sheets

[Offset Sort]

[Sort]

[Offset Group]

[Group]

[Corner Staple]

[2 Position Staple]

[Left Corner]

[Right Corner]

[Left]

[Top]

[Right]

Output to the secondary (sub) tray

Output mode

Description

[Sort]

Outputs multiple copies of the original set. Copies are stacked upon exit without being offset.

[Group]

Groups together multiple copies of each original. Copies are stacked upon exit without being offset.

Combined with the output modes above, you can also select the desired Face ([Face Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed.

Original

Output

Example

Make 3 printed sets

[Sort]

[Group]

[Face Up]
and [1 to N]

[Face Up]
and [N to 1]

[Face Down]
and [1 to N]

[Face Up]
and [1 to N]

[Face Up]
and [N to 1]

[Face Down]
and [1 to N]

This section describes the following output modes: