Home CopyMaking a Copy in Different Zoom

Making a Copy in Different Zoom

The following 3 modes are provided to change the zoom.

  • Vert./Horiz. Zoom (proportional): Specified within the range from 0.250 to 4.000 in 0.001 (0.1%) increments.

  • Enlarge/Reduce (fixed): Select one from among the eight ratios that are frequently used by a single touch.

  • Set Zoom Ratio: Select one from the three ratios previously programed at a single touch.

  1. Press the [COPY] tab to display the [COPY] screen.

  2. Press [Zoom].

    The [Zoom] screen is displayed.

  3. Specify the desired magnification ratio.

    Vert./Horiz. Zoom (proportional):

    Press [Vert./Horiz. Zoom] to highlight it. Then, use the touch panel keypad or [][] to enter the desired magnification ratio. The entered ratio is displayed on the screen.

    • If wrong number is entered, continue by entering the correct number from the beginning.

    • Keep pressing [][] to change the ratio in 0.001 (0.1%) steps at first, and then in 0.010 (1%) steps.

    Enlarge/Reduce:

    Select the desired zoom key from under [Enlarge] or [Reduce].

    Set Zoom Ratio:

    Select the desired zoom key from under [Set Zoom Ratio].

  4. Press [OK]. The screen returns to the [COPY] screen.

    • To resume the previous setting, press [Cancel].