Home CopyMixed: Copying Original in Mixed-Size

Mixed: Copying Original in Mixed-Size

Make this setting to copy the mixed-size original set scanned from ADF with [Auto Paper] or [Auto Zoom] function activated.

The following two types of mixed-size originals are available.

Same Width: Select this option to use an original with same-width and different-size pages, which is to be loaded on the ADF.

Different Width: Select this option to use an original with different-width and -size pages.

  • If you load an original with same-width and different-size pages on the ADF and select [Different Width], it may cause copy productivity to be reduced or a copied image to become skewed.

  • If you load an original with different-width and -size pages on the ADF and select [Same Width], it may cause the original to become creased or edge-folded. Select the appropriate option to suit the type of mixed-size original.

Setting options

Description

[Auto Paper]

Makes a copy of the same size as the original set.

[Auto Zoom]

Copies onto a single and desired paper size in appropriate zoom ratio automatically selected for each original page.

  1. Position the original.

    Arrange mixed-size originals aligning the left and rear sides in the ADF.

  2. Press the [COPY] tab to display the [COPY] screen.

  3. Press [Original Setting].

    The [Original Setting] screen is displayed.

  4. Select [Same Width] or [Different Width] under [Special].

  5. Press [OK] to return to the [COPY] screen.

    • To restore the default setting, press [Default Set]. To resume the previous setting, press [Cancel].