HomeTroubleshootingWhen a Message Appears to Replace Consumables or Carry Out Cleaning

When a Message Appears to Replace Consumables or Carry Out Cleaning

When staples in the finisher have run out

When staples in the Finisher have run out, the following message appear.

Take action while referring to the label inside the machine.

Reference
  • For details on the replacement procedure when using the Finisher FS-535, refer to Here (bizhub C554 only).
  • For details on the replacement procedure when using the Saddle Stitcher SD-512, refer to Here (bizhub C554 only).
  • For details on the replacement procedure when using the Finisher FS-534, refer to Here.
  • For details on the replacement procedure when using the Saddle Stitcher SD-511, refer to Here.
  • For details on the replacement procedure when using the Finisher FS-533, refer to Here.

When the punch scrap box is full

When the punch scrap box is full, the following message appears (at replacement by user).

Take action while referring to the label inside the machine.

Reference
  • For details on the handling procedure when using the Finisher FS-535, refer to Here (bizhub C554 only).
  • For details on the handling procedure when using the Z Folding Unit ZU-606, refer to Here (bizhub C554 only).
  • For details on the handling procedure when using the Finisher FS-534, refer to Here.
  • For details on the handling procedure when using the Finisher FS-533, refer to Here.

When toner is running out in the Toner Cartridge

When toner is running out in Toner Cartridge, a message appears as shown below (at replacement by user).

Reference
  • For details on the replacement procedure in the bizhub C554/C454 environment, refer to Here.
  • For details on the replacement procedure in the bizhub C364/C284/C224 environment, refer to Here.

When the Drum Unit needs to be replaced

When the replacement time has come for the Drum Unit, the following message appears (at replacement by user). Tap [Start Guidance], then follow the displayed guidance to take an action.

Reference
  • For details on the replacement procedure in the bizhub C554/C454 environment, refer to Here.
  • For details on the replacement procedure in the bizhub C364/C284/C224 environment, refer to Here.

When a Development Unit needs to be replaced

When the replacement time has come for a Development Unit, the following message appears. If the message appears, contact your service representative.

When a Waste Toner Box is full

When the Waste Toner Box is full, the following message appears (at replacement by user). Tap [Start Guidance], then follow the displayed guidance to take an action.

Reference
  • For details on the replacement procedure in the bizhub C554/C454 environment, refer to Here.
  • For details on the replacement procedure in the bizhub C364/C284/C224 environment, refer to Here.