Loading Paper into the LCT (built-in)
Using the LCT (built-in) allows you to load a larger amount of paper than Tray1 to Tray4. It will be convenient to load the most frequently used paper into the LCT.
- The LCT (built-in) is an option.
Pull out the
LCT (built-in) tray.
NOTICE
- Be careful not to touch the Film.
Load paper into the right side of the
LCT (built-in) tray so that the side to be printed faces up.
- When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing down.
- For details on the available paper sizes, refer to Here.
NOTICE
- Do not load so many sheets of paper that the top of the stack becomes higher than the mark.
- Do not load the LCT (built-in) tray with paper of a size other than that previously specified. When changing the paper size, contact your service representative.
- If paper is curled, flatten it before loading it.
Load paper into the left side of the
LCT (built-in) tray so that the side to be printed faces up.
Close the LCT (built-in) tray.
When loading paper other than plain paper, change the paper type setting.
- For details, refer to Here.