Loading Paper in Tray1

  1. Pull out Tray1.

  2. Slide the Lateral Guide to fit the size of the loaded paper.

  3. Load paper into the tray with the print side facing up.

    supplementary explanationTo load postcards into a tray, turn the short side to the right (paper feed port) of the tray. Up to 20 postcards can be loaded into the tray.

    supplementary explanationTo load envelopes into a tray, turn the flap part to the right (paper feed port) of the tray while the flap remains folded. Up to 30 envelopes can be loaded into the tray.

    supplementary explanationTo load letterhead paper into a tray, position the side, in which company names, preset text, and other text or images are already printed, face down. Up to 20 letterhead sheets can be loaded into a tray.

    supplementary explanationFor details on the available paper sizes, refer to [Confirm the Available Paper Sizes] .

    NOTICE

    • Do not load an excessive number of sheets such that the top of the stack is higher than the Down-pointing triangle mark.

    • If paper is curled, flatten it before loading it.

  4. Slide the Lateral Guide to fit the size of the loaded paper.

    NOTICE

    • Exercise care to ensure that there is no clearance between the Lateral Guide and paper.

  5. Close Tray1.

  6. Change the paper type and paper size on the Control Panel.

    supplementary explanationFor details, refer to [Paper] .